2lb Pour Foam Gl Kit - Hi Bond
Evercoat Pour Foam 2 Gallon Set, 2 lbs.. A two-part liquid urethane closed cell foam. For use in hulls and cavities for flotation or insulation. Not affected by gas or oil. 2 Lb. per cubic foot density. Mix ratio is 1 to 1.
4LB POUR FOAM GL KIT
Evercoat Pour Foam 2 Gallon Set, 4 lbs.. A two-part liquid urethane closed cell foam. For use in hulls and cavities for flotation or insulation. Not affected by gas or oil. 4 Lb. per cubic foot density. Mix ratio is 1 to 1.
Evercoat 407 Polyester Glazing Putty - 0.5 gallon
Evercoat Polyester Glazing Putty, 1/2 Gallon. Before painting, remove rough sanding scratches with this glazing putty.Ultra-smooth surfacing putty can be applied over roughly sanded fiberglass, metal or filler surfaces.Key featuresCan be applied directly...
Evercoat Hi-Bond Gelcoat No Wax, Neutral, Gallon
Evercoat Hi-Bond Gelcoat No Wax, Neutral, Gallon. Quality gelcoat offered in quantities for small or large jobs.Offered with or without wax. Waxed cures to a hard, smooth finish. Non-waxed remains tacky after hardening,which eliminates the need to sand...
Evercoat Polyester Laminating Resin, Gallon
Evercoat Polyester Laminating Resin, Gallon. Remains tacky for adhesion to fiberglass layups.Remains tacky. For multiple fiberglass layups and holding fiberglass on vertical surfaces during layup. Not for final coat. Catalyst included.Specifications ...
Evercoat Vinyl-Ester Resin, Gallon
Evercoat Vinyl-Ester Resin, Gallon. High in strength and more water-resistant than polyester resin, vinyl-ester resin is a good choice for manyfiberglass layups.A premium, high quality, high strength, vinyl-ester based resin. Use where the highest possible...